User login

To prevent automated spam submissions leave this field empty.

Or login using:

Featured products

Melbourne Town Hall Pipe Organ Samples

System requirements and recommendations

It is intended (and required) that the Melbourne Town Hall Pipe Organ Samples be operated within Hauptwerk, a virtual pipe organ host software application (purchased separately). The Melbourne Town Hall Pipe Organ Samples work with Hauptwerk 4.2 and later, and a valid license for Hauptwerk is required to load the organ.

System requirements for the Melbourne Town Hall Organ
Platform PC/Mac
Host software

Hauptwerk version 4.2 or later

Advanced Edition is recommended, Basic Edition is required

(the Inspirations Edition works with Hauptwerk Free)


i7 or Xeon or better is recommended

Dual-Core or equivalent is required

Sound card ASIO compatible recommended

The Inspirations demo version does not require the presence of a Hauptwerk USB key.

For further information, please refer to Hauptwerk's detailed requirements on Hauptwerk's website.

Detailed RAM and polyphony guidelines

Hauptwerk loads all samples in the computer's RAM, with several loading options available according to your computer's specification. For wet sample sets offering built-in long reverberation, most of the RAM usage is due to the release samples. If you have convolution or other reverberation technology available, less RAM and polyphony will allow you to load and play the full organ. If you have more RAM, you can load the full organ with the release samples and enjoy the original sound. We recommend using Hauptwerk's built-in lossless memory compression to reduce the loading size. Below we have summarised the RAM requirements with their corresponding quality options.

RAM requirements for the Scorze organ
Edition Loading setup Bits Loops Acoustics Releases Required RAM Computer RAM*
Professional Edition
Recommended Full organ, 175 stops 24 all original all 56.6 GB 64 GByes
  single 31.6 GB 48 GByes
  250 ms (all) 25.21 GB 32 GByes
  Full organ, 175 stops 16 all original all 29.6 GB 32 GB yes
  single 17.2 GB 24 GB yes
For convolution reverb 120 ms (single) 13 GB 16 GB yes

*The Required RAM column above is the memory requirement that also includes Hauptwerk™'s own memory consumption, so this represents the RAM the sample set and Hauptwerk™ together will use, but some additional RAM may be required for the operating system itself, (not included in these figures). The measures were obtained on a Windows-based computer. The Computer RAM column shows a recommendation on the amount of RAM your computer should have as a minimum for a given loading setup assuming that some additional RAM is used by the operating system. This value might be different for each case so we recommend the maximum possible amount of RAM installable in your computer for this sample set, except if you are working with external reverberation or in a dry acoustic environment. Also note that on the Mac you may require more RAM in the computer than the value indicated above, due to the Mac OSX RAM allocation behaviour. Also note that Windows is capable of loading more content than your available RAM, loading (paging) the additional sample data to your hard drive, reading it once the sound is needed (played). In some cases this will cause glitches in the sound when played in real time since the hard drive is slower to access than the computer's RAM, but makes the full library usable in offline music composition and recording even if you do not have the required amount of RAM.